¶ With a bed level sensor
- Rough: This tool helps you level the bed manually to make it approximately horizontal.
- Automatic: This tool helps you level the bed automatically with a sensor. It compensates for the bed’s tilt and imperfect shape.
- Reset: Reset the sensor in case it is in an error state (flashing red). This is only used with a BLTouch sensor.
- Z Height: The firmware has no way to know the distance between the sensor and the nozzle. For X and Y offsets, it depends of the sensor’s support and it does not have to be precise. But for the Z axis, it has to be very precise. This tool helps you measure the Z-height.
- X Twist: This tool helps compensate a twist on the x-axis.
- Grid: Displays the current mesh constructed by the manual or automatic bed leveling.
Tap the Back button to go back to the previous panel.
¶ Without a bed level sensor
- Rough: This tool helps you level the bed manually to make it approximately horizontal.
- Manual: This tool helps you level the bed precisely without a sensor, using the tip of the extruder. It compensates for the bed’s tilt and imperfect shape.
- X Twist: This tool helps compensate a twist on the x-axis.
- Grid: Displays the current mesh constructed by the manual or automatic bed leveling.
- Tap the Back button to go back to the previous panel.