- Motors: Displays several settings related to the stepper motors (see bellow).
- PID: Displays the current PID settings.
- Leveling: Displays and let you adjust sensor’s settings.
- Brightness: Change LCD parameters such as the dimming and the brightness.
- Beeper: Change Beeper parameters such as duration.
- Runout: Change parameters of the runout detection.
- Power Off: Change parameters of the Power Control module.
- Power Loss: Change parameters of the Power Loss Detection module.
- Reset: (in the top-right corner): Resets all the parameters stored in EEPROM to their factory values:
- Before resetting all the settings to their default, you have to confirm it by tapping the Checkmark button.
- If you do not want to reset the settings, tap the Back button.
- Once confirmed, all settings are reset to their default and saved in the EEPROM memory of the motherboard.